ZYX 3.50 ̼Ż:
1.ŻβƣβܣͣʱӲʣص
2.ŻƣӰڵȶʱĻζ
3.ӿҡ˲ݵӦٶȣֱӸ֡
4.Żȶ
5.޸ҡ˵趨֣ҡ˵ĿƸ˳

3.50״ηע
1.״ηʱֿٶȼС(Ӧ)D
2.βʱβҪ8ҵļжȡ
3.ͣʱɲٶȲһ£ԵӦɲٶ,"ɲٶ""ɲٶ"ԽɲԽ졣


1.Optimize the heading hold control, eliminate bouncing when spin brake.
2.Optimize the main rotor control, eliminate swing while tic toc.
3.Accelerate the response speed of joystick, so that the helicopter can follow your hands better.
4.Optimize the pirouette compensation to make pirouette flight more stable. 
5.Improve the joystick dead band setting to make stick control smoother.


 First Flight Attention with 3.50 Version: 
1.During first flight, if there are hunting or swing with you helicopter, please decrease the D gain on corresponding axis first. 
2.When tail servo is on neutral point, set the tail pitch to be approximately 8in the direction that compensates the main rotor torque by adjusting the linkage length.
3.If the brake speed of left and right pirouette are different, please adjust the "Deceleration L" or "Deceleration R". The higher parameter value, the break will be faster.
 




